Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

OPERATING INSTRUCTIONS

As suitable lubricating nozzle, we recommend our hollow-type nozzles or hydraulic nozzles by using our push-type grease guns type A+B.

  • Description
  • Reviews (0)
  • Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

Description

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

SANLI – the specialist for lubrication equipment

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

is well known as one of the worldwide biggest manufacturers of lubrication equipment and turn parts.

Come along with us into the world of

 Grease Nipples

Maintaining permanent motion!

They are small and inconspicious, but responsible for keeping machines and all kinds of equipment in motion – whether in a harvester in Russia, a pipeline in Alaska, or a brewery in Australia.

There is a SANLI Grease Nipple for every application purpose in most sizes, types and composition. With a range of more than 1,500 different types of nipples with about 70 different thread forms we offer the largest product line worldwide.

Depending on the application and the installation sizes, we can manufacture grease nipples according to international standards. Other than a standard version made of steel, zinc-plated and passivated, we offer many other types, made of brass or stainless steel.

You will always find a solution in our range of products – even for the most challenging application.

 

Grease-Nipples-E (K2) DIN 3402 -45

Grease-Nipples-E (K2) DIN 3402 -45°

Reviews

There are no reviews yet.


Be the first to review “Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°”

Ball-Type Grease NipplesType E (K2a) Drive-In DIN 3402 45°

VERSIONS In general, our ball-type grease fittings similar to DIN are made of steel, zinc-plated and passivated, and they are featured with a tapered thread. The head diameter is 6.5 (-0.2) mm /0.256" - 0.008". We offer various standard types also in brass or stainless steel V2A/V4A. Of course, our ball-type grease fittings are also available in different angle versions, or as drive-in type. Upon request, SANLI manufactures ball-type fittings in further versions, with respect to e. g. dimension material thread size thread form (e. g. with cylindrical thread) different opening pressure surface colour (e. g. yellow passivated) further surface treatment etc.
You've just added this product to the cart:

×

Powered by WhatsApp Chat

× Nasıl yardımcı olabiliriz?